http://www.uk-sea-fishing.org/how-to-s-f41/-t1.htm Here is a place to have a look at, for all those people that say "how do i do that?" Wed, 11 Aug 2010 11:06:04 GMT 10 http://i65.servimg.com/u/f65/13/65/23/93/heder110.gif http://www.uk-sea-fishing.org/how-to-s-f41/-t1.htm http://www.uk-sea-fishing.org/how-to-s-f41/how-to-make-a-home-made-smoker-t1301.htm h4ppy-chris i am gona make one and put pics up as i go so if you have any help please feel free. here's a start from nigel and his smoker that inspired me to make one here are two photos one showing a steady stream of smoke coming from the stack the other showing the fish dab whiting cod and one butterfly mackeral fillet all of which were devoured in minuets. HOW TO'S Wed, 11 Aug 2010 11:06:04 GMT http://www.uk-sea-fishing.org/how-to-s-f41/how-to-make-a-home-made-smoker-t1301.htm#8498 http://www.uk-sea-fishing.org/how-to-s-f41/how-to-make-a-home-made-smoker-t1301.htm http://www.uk-sea-fishing.org/how-to-s-f41/pier-fishing-t1299.htm Davey A large proportion of sea anglers start their careers at the end of local pier. Yet, many never achieve the catches they should from these structures, simply because they fail to understand the basics and develop in built mistakes that cost them fish. Those same mistakes can last a lifetime. There are plenty of piers spread throughout the UK, and it's worth taking the trouble to learn something about pier techniques that allow you to take full advantage of them when the opportunity arises. ... HOW TO'S Mon, 09 Aug 2010 20:03:15 GMT http://www.uk-sea-fishing.org/how-to-s-f41/pier-fishing-t1299.htm#8482 http://www.uk-sea-fishing.org/how-to-s-f41/pier-fishing-t1299.htm http://www.uk-sea-fishing.org/how-to-s-f41/happy-birthday-t1221.htm Corectus Happy Birthday Chris, have a good one mate. Happy birthday to you Happy birthday to you Happy birthday, Happy Chris Happy birthday toooooooooo youuuuuuuuuuuuuu Best Wishes Clive & Živilė HOW TO'S Thu, 10 Jun 2010 23:30:27 GMT http://www.uk-sea-fishing.org/how-to-s-f41/happy-birthday-t1221.htm#7843 http://www.uk-sea-fishing.org/how-to-s-f41/happy-birthday-t1221.htm http://www.uk-sea-fishing.org/how-to-s-f41/tide-time-table-t1211.htm Corectus
Regards
Clive ]]> HOW TO'S Sat, 05 Jun 2010 16:45:33 GMT http://www.uk-sea-fishing.org/how-to-s-f41/tide-time-table-t1211.htm#7736 http://www.uk-sea-fishing.org/how-to-s-f41/tide-time-table-t1211.htm http://www.uk-sea-fishing.org/how-to-s-f41/turbot-fishing-t1187.htm Davey Most beach anglers have the idea that shore turbot are rare. Those caught being lucky fish. Certainly, luck plays a part in the size of the turbot you catch, but turbot within shore casting range are definitely not rare. A few anglers do target these fish from the beaches and do extremely well with double figure fish very much on the cards. WHERE TO EXPECT TURBOT Turbot are found right around the UK. Like most fish though, certain areas are better than others. Chesil Beach in Dorset turns ... HOW TO'S Wed, 19 May 2010 18:31:07 GMT http://www.uk-sea-fishing.org/how-to-s-f41/turbot-fishing-t1187.htm#7423 http://www.uk-sea-fishing.org/how-to-s-f41/turbot-fishing-t1187.htm http://www.uk-sea-fishing.org/how-to-s-f41/pendulum-casting-t1166.htm h4ppy-chris how many of you have seen a lead cast 240+yards well i seen it to day fecking mad
]]> HOW TO'S Thu, 13 May 2010 01:46:09 GMT http://www.uk-sea-fishing.org/how-to-s-f41/pendulum-casting-t1166.htm#7281 http://www.uk-sea-fishing.org/how-to-s-f41/pendulum-casting-t1166.htm http://www.uk-sea-fishing.org/how-to-s-f41/pendulum-casting-t1034.htm h4ppy-chris


no stance and rod too high for the cast]]> HOW TO'S Thu, 25 Mar 2010 22:55:36 GMT http://www.uk-sea-fishing.org/how-to-s-f41/pendulum-casting-t1034.htm#6240 http://www.uk-sea-fishing.org/how-to-s-f41/pendulum-casting-t1034.htm http://www.uk-sea-fishing.org/how-to-s-f41/brighton-cast-t1139.htm Buck2003 http://www.youtube.com/watch?v=uovdjgQvUGU

I've tried it before....never did I think I'd really be casting in Brighton lol

Buck ]]> HOW TO'S Mon, 03 May 2010 15:47:12 GMT http://www.uk-sea-fishing.org/how-to-s-f41/brighton-cast-t1139.htm#7013 http://www.uk-sea-fishing.org/how-to-s-f41/brighton-cast-t1139.htm http://www.uk-sea-fishing.org/how-to-s-f41/please-help-me-with-a-knot-t1014.htm h4ppy-chris
now what kont do i tye so when i finish the rig it stays the same length?]]> HOW TO'S Fri, 19 Mar 2010 11:18:09 GMT http://www.uk-sea-fishing.org/how-to-s-f41/please-help-me-with-a-knot-t1014.htm#6106 http://www.uk-sea-fishing.org/how-to-s-f41/please-help-me-with-a-knot-t1014.htm http://www.uk-sea-fishing.org/how-to-s-f41/conger-from-the-shore-t1002.htm Davey There are few species caught from the shore in the UK that incites such a varied amount of reaction from anglers as the conger eel. Bit like Marmite, you either love it or hate it. As for me, I love them. Though can’t say the same for my mate, who’s the poor sod who has to go down to the waters edge to beach it. Most anglers that come in contact with them do so by accident, the eel taking bait put out for other species, invariably the fight doesn’t last long, the eel either ... HOW TO'S Sun, 14 Mar 2010 14:48:47 GMT http://www.uk-sea-fishing.org/how-to-s-f41/conger-from-the-shore-t1002.htm#6051 http://www.uk-sea-fishing.org/how-to-s-f41/conger-from-the-shore-t1002.htm http://www.uk-sea-fishing.org/how-to-s-f41/perfect-pump-washers-t988.htm Moscowmale The best way to make silicone washers for the Alvey Slim Bore bait pump: Grab a 78g tube of Geocel Aquarium Sealant, about £4.50 but this will make about 10 x 10mm washers. Carefully cut the top end off, wet your finger and smooth the silicone flat Leave it for a week or so, turn the tube upside down, then cut the other end off and smooth the silicone flat. Now put it somewhere warm where it can set through. Mine usually takes about six months, but even before that I can start ... HOW TO'S Tue, 09 Mar 2010 19:38:15 GMT http://www.uk-sea-fishing.org/how-to-s-f41/perfect-pump-washers-t988.htm#5966 http://www.uk-sea-fishing.org/how-to-s-f41/perfect-pump-washers-t988.htm http://www.uk-sea-fishing.org/how-to-s-f41/vacuum-sealing-bait-with-my-new-sealer-video-t928.htm h4ppy-chris

]]> HOW TO'S Tue, 09 Feb 2010 10:30:06 GMT http://www.uk-sea-fishing.org/how-to-s-f41/vacuum-sealing-bait-with-my-new-sealer-video-t928.htm#5415 http://www.uk-sea-fishing.org/how-to-s-f41/vacuum-sealing-bait-with-my-new-sealer-video-t928.htm http://www.uk-sea-fishing.org/how-to-s-f41/how-to-tie-a-uni-knot-t766.htm h4ppy-chris

]]> HOW TO'S Wed, 11 Nov 2009 19:23:44 GMT http://www.uk-sea-fishing.org/how-to-s-f41/how-to-tie-a-uni-knot-t766.htm#4009 http://www.uk-sea-fishing.org/how-to-s-f41/how-to-tie-a-uni-knot-t766.htm http://www.uk-sea-fishing.org/how-to-s-f41/shock-leader-knot-t767.htm h4ppy-chris ]]> HOW TO'S Wed, 11 Nov 2009 21:07:49 GMT http://www.uk-sea-fishing.org/how-to-s-f41/shock-leader-knot-t767.htm#4012 http://www.uk-sea-fishing.org/how-to-s-f41/shock-leader-knot-t767.htm http://www.uk-sea-fishing.org/how-to-s-f41/pumping-black-lugg-t743.htm Anonymous dug a few and found they were blacks,very deep thou

ive just been given a pump but havent a clue.
ive read a few post and notice you guys seem pros at it

can you help a pumper in the making

Ben ]]> HOW TO'S Fri, 06 Nov 2009 12:24:14 GMT http://www.uk-sea-fishing.org/how-to-s-f41/pumping-black-lugg-t743.htm#3881 http://www.uk-sea-fishing.org/how-to-s-f41/pumping-black-lugg-t743.htm http://www.uk-sea-fishing.org/how-to-s-f41/how-to-add-a-picture-t680.htm h4ppy-chris
]]> HOW TO'S Fri, 02 Oct 2009 17:16:48 GMT http://www.uk-sea-fishing.org/how-to-s-f41/how-to-add-a-picture-t680.htm#3413 http://www.uk-sea-fishing.org/how-to-s-f41/how-to-add-a-picture-t680.htm http://www.uk-sea-fishing.org/how-to-s-f41/hook-sizes-t679.htm h4ppy-chris ]]> HOW TO'S Fri, 02 Oct 2009 14:38:13 GMT http://www.uk-sea-fishing.org/how-to-s-f41/hook-sizes-t679.htm#3412 http://www.uk-sea-fishing.org/how-to-s-f41/hook-sizes-t679.htm http://www.uk-sea-fishing.org/how-to-s-f41/how-to-fillet-fish-t659.htm h4ppy-chris http://www.filleting-fish.com/fish-species]]> HOW TO'S Wed, 23 Sep 2009 14:51:40 GMT http://www.uk-sea-fishing.org/how-to-s-f41/how-to-fillet-fish-t659.htm#3234 http://www.uk-sea-fishing.org/how-to-s-f41/how-to-fillet-fish-t659.htm http://www.uk-sea-fishing.org/how-to-s-f41/wreck-fishing-t593.htm h4ppy-chris What is wreck fishing? Wreck fishing is when you fish over sunken wrecks. The wrecks can be anything from boats to submarines that lay at depths from 70 to 300 feet on the seas bottom. The wrecks can be from the first / second world war or general lost at sea boats. There size varies from 20 feet to over 250 feet long. Wrecks can be anything from just a mile offshore to 35 / 40 miles offshore, which can mean that it will take several hours steaming to get to the chosen wrecks. There ... HOW TO'S Sun, 30 Aug 2009 11:54:27 GMT http://www.uk-sea-fishing.org/how-to-s-f41/wreck-fishing-t593.htm#2721 http://www.uk-sea-fishing.org/how-to-s-f41/wreck-fishing-t593.htm http://www.uk-sea-fishing.org/how-to-s-f41/how-to-whip-an-eye-on-your-rod-t465.htm h4ppy-chris to remove your old eye warm the resin with a lighter and cut it of with a knife. then sand it clean. cut a length of thread about 8 inch you will need it later tape your eye in place i use the tape to hold the thread then wind it on to the start place. then wind it back over it self to trap it. wind on about 8 turns and snip of the trapped thread. then wind on until about 8 turns left to go. using the 8 inch thread make a loop and trap it. turn on 8 more ... HOW TO'S Fri, 19 Jun 2009 14:17:26 GMT http://www.uk-sea-fishing.org/how-to-s-f41/how-to-whip-an-eye-on-your-rod-t465.htm#1950 http://www.uk-sea-fishing.org/how-to-s-f41/how-to-whip-an-eye-on-your-rod-t465.htm